The definitive version is available at:
http://www.sciencedirect.com/science/journal/00221694
This paper describes the use of an automated method of measuring water level changes in Mariotte-type reservoirs via time domain reflectometry (TDR) and demonstrates its field application for measurements of soil hydraulic properties. The method is based on the assumption that the travel time of a TDR pulse propagating along a transmission line immersed in an air–water medium is the summation of the pulse travel times in the air and water phases. A TDR cable tester generates a pulse that propagates through a three-rod probe traversing the centre of the Mariotte reservoir from top to bottom. The reflection of the pulse is automatically transferred to a computer for waveform analysis with the water level being a simple function of probe length and the air, water, and air–water medium dielectric constants as measured by the cable tester. Water level measurements obtained with the TDR technique showed close agreement with those obtained using visual and pressure transducer procedures. The application of this TDR method as an alternative to more traditional methods was demonstrated in a field experiment using a tension disc infiltrometer. The TDR approach allows for automated water level measurements and is simple, accurate and easy to implement. Moreover, it allows for simultaneous TDR measurements of both water flow and volumetric water content of soil below the infiltrometer disc.
This research was supported by funding from the Comisión Interministerial de Ciencia y Tecnología of Spain (Grant no. AGF98-0261-C02-02, and PNFPI predoctoral fellowship and research contract awarded to the first and second authors, respectively).
Peer reviewed