dc.creator |
Pardo, Lorena |
|
dc.creator |
Jiménez, B. |
|
dc.creator |
Hungría, Teresa |
|
dc.creator |
Moure Arroyo, Alberto |
|
dc.creator |
Castro, A. |
|
dc.date |
2008-05-29T07:17:23Z |
|
dc.date |
2008-05-29T07:17:23Z |
|
dc.date |
2004-01 |
|
dc.date.accessioned |
2017-01-31T01:29:50Z |
|
dc.date.available |
2017-01-31T01:29:50Z |
|
dc.identifier |
Boletín de la Sociedad Española de Cerámica y Vidrio 43(1): 30-34 (2004) |
|
dc.identifier |
0366-3175 |
|
dc.identifier |
http://hdl.handle.net/10261/4630 |
|
dc.identifier.uri |
http://dspace.mediu.edu.my:8181/xmlui/handle/10261/4630 |
|
dc.description |
[EN] The environmental protection issues are driving forces nowadays in the scientific research on materials. From this point of view, it is a need
to find alternatives to the present commercial piezoceramics, based on lead titanates-zirconates. The production of these materials requires
handling of big amounts of lead oxide, which is highly toxic. Alkaline niobate piezoceramics are considered a good alternative for the future
substitution of commercial piezoceramics by lead-free materials. However, the processing of these ceramics is difficult by conventional
ceramic routes. There is a need to search for new routes of processing.
The mechanochemical activation was used in this work for the first time to get Na1-xLixNbO3 ceramics in the Na rich region. Stoichiometric
mixtures of Na2CO3 or Na2O, Li2CO3 and Nb2O5 were activated in a vibrating mill. A progressive broadening of the X-ray diffraction peaks
of the mixtures was observed as the milling time increased. Nevertheless, the precursors did not became fully amorphous. The thermal
evolution of the activated precursors was also tested. Ceramics were obtained by sintering or hot pressing and their piezoelectric properties
were studied. |
|
dc.description |
[ES] La protección medioambiental es uno de los factores que impulsan diversas áreas de la investigación en materiales. Existe la necesidad de
la búsqueda de alternativas a las cerámicas ferro-piezoeléctricas comerciales basadas en los titanatos-circonatos de plomo, que requieren
el manejo de grandes cantidades de óxido de plomo, muy tóxico, en su procesado. Los niobatos alcalinos se consideran buenos candidatos
para esta sustitución. Sin embargo, es difícil conseguir cerámicas con altas densificaciones. De aquí la necesidad de investigar nuevas rutas
de procesado.
La activación mecanoquímica se ha utilizado por primera vez en este trabajo para obtener cerámicas de Na1-xLixNbO3, en la región rica en
Na. Se han activado mecanoquímicamente mezclas estequiométricas de Na2CO3 o Na2O, Li2CO3 y Nb2O5 en un molino vibratorio. Se ha
observado el progresivo ensanchamiento de los picos de difracción de rayos X de las mezclas a medida que se aumentaba el tiempo de
molienda, pero los precursores no llegan a ser amorfos para la difracción de rayos X. A partir de estos precursores se han obtenido cerámicas
mediante sinterización o prensado en caliente y estudiado sus propiedades piezoeléctricas. |
|
dc.description |
This work was funded by EC project “LEAF” (G5RD-CT2001-
00431) and MAT2001-4818E (MCYT Spain). T.H. thanks the MECD of
Spain for the postgraduate FPU grant awarded (AP2000-3477). |
|
dc.description |
Peer reviewed |
|
dc.format |
433391 bytes |
|
dc.format |
application/pdf |
|
dc.language |
eng |
|
dc.publisher |
Sociedad Española de Cerámica y Vidrio |
|
dc.relation |
http://boletines.secv.es/es/index.php?id=17&vol=43 |
|
dc.rights |
openAccess |
|
dc.subject |
Sodium-lithium niobate |
|
dc.subject |
Piezoceramics |
|
dc.subject |
Ferroelectrics |
|
dc.subject |
Mechanical activation |
|
dc.subject |
Mobato de litio y sodio |
|
dc.subject |
Piezocerámicas |
|
dc.subject |
Ferroeléctricos |
|
dc.subject |
Activación mecanoquímica |
|
dc.title |
Sodium-lithium niobate piezoceramics prepared by mechanochemical activation assisted methods |
|
dc.title |
Piezoceramicas de niobato de sodio y litio preparadas por métodos asistidos de activación mecanoquímica |
|
dc.type |
Artículo |
|