أعرض تسجيلة المادة بشكل مبسط

dc.contributor Comisión Interministerial de Ciencia y Tecnología, CICYT (España)
dc.contributor Inael Electrical Systems
dc.creator Peiteado, Marco
dc.creator Iglesias Vega, Yolanda
dc.creator Frutos, José de
dc.creator Fernández Lozano, José Francisco
dc.creator Caballero Cuesta, Amador
dc.date 2008-05-09T11:17:36Z
dc.date 2008-05-09T11:17:36Z
dc.date 2006-05
dc.date.accessioned 2017-01-31T01:13:16Z
dc.date.available 2017-01-31T01:13:16Z
dc.identifier Boletín de la Sociedad Española de Cerámica y Vidrio 45(3): 158-162 (2006)
dc.identifier 0366-3175
dc.identifier http://hdl.handle.net/10261/4117
dc.identifier.uri http://dspace.mediu.edu.my:8181/xmlui/handle/10261/4117
dc.description [EN] Tin (IV)-doped zinc oxide ceramics find its main application as specific gas sensor devices. The sensor ability of the mixture and its particular affinity for a particular gas (selectivity) depends both on the crystalline phases in the microstructure of the sintered semiconductor and on the degree of tin incorporation into ZnO lattice. By means of a highly reactive coprecipitation method it is revealed that the range of solid solution of tin in zinc oxide stays below 0.1 mol % of SnO2 since higher concentrations lead to segregation of a secondary Zn2SnO4 spinel type-phase.
dc.description [ES] Los materiales cerámicos basados en óxido de cinc dopado con estaño (IV) encuentran su principal aplicación como dispositivos sensores específicos de gases. La capacidad sensora de la mezcla de óxidos y su particular afinidad por un determinado gas específico (selectividad) es función directa de cuáles sean las fases cristalinas presentes en la microestructura del semiconductor sinterizado, así como del grado de incorporación del estaño en la red del ZnO. La obtención del polvo cerámico de partida por un método de coprecipitación altamente reactivo revela que el rango de solución sólida del estaño en el óxido de cinc se encuentra por debajo del 0.1 % en moles de SnO2; concentraciones superiores llevan a la segregación de una fase secundaria, Zn2SnO4, con estructura de tipo espinela.
dc.description This work has been conducted within the CICYT MAT 2004-04843-C02-01 project. The authors would like to express its gratitude to the company INAEL S.A. (Toledo, Spain).
dc.description Peer reviewed
dc.format 313700 bytes
dc.format application/pdf
dc.language eng
dc.publisher Sociedad Española de Cerámica y Vidrio
dc.relation http://boletines.secv.es/es/index.php?id=6&vol=45
dc.rights openAccess
dc.subject Doping
dc.subject Microstructure
dc.subject Semiconductor
dc.subject ZnO
dc.subject Dopante
dc.subject Microestructura
dc.title Preparation of ZnO-SnO2 ceramic materials by a coprecipitation method
dc.title Obtención de materiales cerámicos basados en ZnO-SnO2 por coprecipitación
dc.type Artículo


الملفات في هذه المادة

الملفات الحجم الصيغة عرض

لا توجد أي ملفات مرتبطة بهذه المادة.

هذه المادة تبدو في المجموعات التالية:

أعرض تسجيلة المادة بشكل مبسط