| dc.creator |
García Mateo, Carlos |
|
| dc.creator |
García Caballero, Francisca |
|
| dc.date |
2008-03-10T14:12:08Z |
|
| dc.date |
2008-03-10T14:12:08Z |
|
| dc.date |
2005 |
|
| dc.date.accessioned |
2017-01-31T01:00:38Z |
|
| dc.date.available |
2017-01-31T01:00:38Z |
|
| dc.identifier |
ISIJ International, Vol. 45 (2005), No. 11, pp. 1736–1740 |
|
| dc.identifier |
http://db1.wdc-jp.com/isij/abst/200511/is451736.html |
|
| dc.identifier |
0915-1559 |
|
| dc.identifier |
http://hdl.handle.net/10261/3186 |
|
| dc.identifier.uri |
http://dspace.mediu.edu.my:8181/xmlui/handle/10261/3186 |
|
| dc.description |
Novel bainitic microstructures, consisting of slender ferrite plates (tens of nm) in a matrix of retained austenite, have reported maximum yield strength of 1.4 GPa, ultimate tensile strength of 2.2 GPa, 30% ductility and respectable levels of fracture toughness (∼51 MPa m0.5). The unusual combination of properties is attributed to the fine bainitic plates and the presence of retained austenite in the microstructure. |
|
| dc.description |
The authors acknowledge financial support from the
Spanish Ministerio de Educación y Ciencia for the financial
support in the form of Ramón y Cajal contracts (RyC 2002
and 2004 respectively). Some of this work was carried out
under the auspices of an EPSRC/MOD sponsored project
on bainitic steels at the University of Cambridge; we are
extremely grateful for this support over a period of three
years. The authors are extremely grateful to Prof. H. K. D. |
|
| dc.description |
Peer reviewed |
|
| dc.format |
671313 bytes |
|
| dc.format |
application/pdf |
|
| dc.language |
eng |
|
| dc.publisher |
Iron and Steel Institute of Japan |
|
| dc.rights |
openAccess |
|
| dc.subject |
Carbon content |
|
| dc.subject |
Bainite |
|
| dc.subject |
Mechanical properties |
|
| dc.subject |
Plate thickness |
|
| dc.subject |
Dislocation density |
|
| dc.title |
Ultra-high–strength Bainitic Steels |
|
| dc.type |
Artículo |
|